Abrasive Tools for Deburring Ceramic Tiles
In the ceramic production process, certain utensils, known as “felt discs”, are used for the cleaning of the external border. They are non-woven fabric flap wheelscontaining very fine abrasive grains of silicon carbide.
ABRASIVE WHEEL DIMENSIONS
The range of tools for this type of use is composed of wheels with an external diameter of 150mm and with a 50mm hole, as well as, in smaller quantities, wheels with an external diameter of 200mm and 76/80mm hole. The most commonly-used thickness is of 40mm, followed by that of 50mm and others of a decreasing thickness. The maximum speed for 150mm wheels is 3200rpm and the maximum speed for 200mm wheels is 2500rpm.
The density of a wheel depends on the quantity of flap contained therein. With a constant density, the number of flap can vary according to the type of material. With a constant pressure, the lamellae of a soft wheel flex more than those of a greater density. Therefore, a more flexible flap leaves a longer mark upon the worked surface in respect to those that work with the tip.
Athena Abrasives S.r.l.
Via Paolo Monelli 15
41042 Fiorano Modenese (MO) MAP
Tel 1: +39 0536 910229
Tel 2: +39 0536 813053
Fax: +39 0536 889585
Ufficio del Registro delle imprese Modena 03299560361
REA 375805 – P. IVA e Cod. Fiscale 03299560361
Paid-up share capital € 50 000.00